Blue audio port on monitor
Audio outputs? I think he means for a computer. Mine has orange black and grey as well. If you have 7. You will have to refer to the manual to figure out which is which. If you don't have it anymore, check the manufacturers website, they probably have it on their website.
Also there may be software installed that tells you what is what. It's a colour code for computer users who don't know the meaning of input and output. Mic in is a microphone level input. Line Out Green goes to your speakers or headphones whichever one you use.
Before Bolero's answer, he had one reply -badly written, but still, nothing "arsey" about it. Anyway, I'll drop it. Okay, guys. No need to crap all over each other here, the question has been answered sufficently, and this is just pointless. Fine, Xevion, but one day there will be a need to crap all over eachother, and then where will you be. No, the whole point of PC99 color coding is to establish a uniform connector color coding scheme for PCs, so that users can quickly get everything plugged in correctly without searching for tiny lettering or faint vendor-specifc symbols.
Well yes, but telling him to look it up in the manual both provides him with a valuable resource in finding information himself, and me with a reason to be lazy and not look it up for him. I don't paticularly like handholding for people when information is readily avalible to them in many places, paticularly those provided with the product in question.
Had he given me more information I could have pointed him to a more specific spot, such as the instructions most soundcard software gives you. Ill be honest though, I didn't think to check wikipedia for the colour standards. Plus I only use headphones on my system, so I don't know all the outputs off the top of my head.
EDIT: Damn you for making me not be lazy. I checked my manual for my board. May your soundcard never suffer from static! Sometimes it's even easier still. Do what I do with an absolutely shot memory every time I move my pc Quite frequently as it happens Plug all the bits in,and find out for yourself, eventually it comes good though my sound mixer crap software is set to the colours being 3 outputs.
What's the difference between Pink, Blue, and Green for audio ports?
16 Types of Computer Ports and Their Functions
I think one's a girl. If you don't know what line in and line out are, you don't need them. Ars Tribunus Militum et Subscriptor. Originally posted by pugfug quote:. Chris Law. Ars Legatus Legionis et Subscriptor. Ars Tribunus Angusticlavius et Subscriptor. Originally posted by penguinboy: quote:. Originally posted by pugfug bolero, that was the kind of answer I was looking for, thanks. Originally posted by pugfug What's the difference between Pink, Blue, and Green for audio ports?
Posted: Tue Jun 20, pm. Registered: Apr 2, Posts: Posted: Wed Jun 21, am.A close look at the video input interfaces used in LCD monitors. With the emergence of a new generation of interfaces, growing numbers of LCD monitors feature multiple and different interfaces. Image quality and ease of use are likely to depend on how well the user knows and uses the unique characteristics of each interface when connecting the appropriate devices.
Copyright ITmedia Inc. Information about Mini DisplayPort was added to the English translation. Driven by demand for higher-resolution monitor environments and the proliferation of high-definition devices, the types of video input interfaces "interfaces" hereinafter found in LCD monitors continue to proliferate. More than likely, significant numbers of users encountering LCD monitors incorporating multiple input systems have wondered what to connect to which terminal.
In this article, we'll discuss, one by one, the main interfaces used today. But first, let's give an overview of the types of interfaces available. The interfaces for LCD monitors designed for use with PCs can be grouped into two categories: analog interfaces, carryovers from the days of CRT monitors, and the digital interfaces developed more recently.
An analog interface involves the additional steps of conversion of digital signals within the PC to analog signals for output and the conversion of these analog signals back into digital form by the LCD monitor receiving the signal. This series of actions can degrade image quality. Image quality also depends on the quality of the route used in converting from analog to digital. A digital interface offers superior image quality, since it transmits digital signals without conversion or modification.
LCD-monitor interfaces also can be grouped by differences in the devices connected. Major categories here are inputs from PCs and inputs from audio-video AV devices. All of these other than the new HDMI standard use analog connections.
Known officially as D-Sub miniature, D-Sub is not exclusive to display use. It's also used for serial-port, parallel-port, SCSI, and other connectors, with the number of connector pins depending on the purpose of use.
HP Desktop PCs - Connecting Speakers or Headphones (Windows 7)
However, these connector standards are rarely if ever found in PCs now for general-purpose personal use, most such applications having migrated to USB. When used as a monitor interface, a D-Sub port is also known as a VGA port, an analog connection standard that's been around for some time. The connector is a DE connector with 15 pins in three rows, often referred to as a "mini-D-Sub pin" or "D-Sub pin" connector.
Some connectors omit unused pins. D-Sub is currently the most widely used monitor interface, compatible with very large numbers of PCs and LCD monitors. The DVI-A connector for analog use is not in general use and can be disregarded when choosing monitor products. Keep in mind that there are two types of mainstream DVI-D digital connections: single link and dual link. DVI-I, the other DVI standard, can be used with both digital and analog connections, depending on the monitor cable used.
Monitor cables with DVI-I connectors on both ends were available at one time. These are rare today, since this configuration made it difficult to determine whether the connection was digital or analog and generated frequent connection issues.
In such cases, the ideal configuration is a digital connection made with a DVI-D cable. All standards offer the capacity to transfer both audio and video signals digitally using a single cable; all offer easy cable attachment and removal. The connectors lack screws, allowing the cables to be readily inserted and removed. The disadvantage: This makes it easier to dislodge a cable connection if a hand or foot catches on the cable.
A technology intended to protect copyright on digital content, HDCP allows authorization of both output and input devices before video is displayed. Currently, however, this implementation appears to be imperfect: In certain cases, input and output devices are not completely compatible i. Some products can transmit audio from the DVI side via a conversion adapter. HDMI was intended mainly for use as a digital video and audio interface for home electronics and AV equipment.Log in.
Ask a Question. TechSpot is dedicated to computer enthusiasts and power users. Ask a question and give support. Join the community hereit only takes a minute.
To see a display I have to plug the monitor into an adapter for the white monitor port. If both monitors are plugged in white and blue ports only the one with the adapter shows anything.
But like I mentioned, the computer knows the other is there. If I set Extend Desktop it does it. I know this because the mouse spends time off the screen as if it were continued and I took a screenshot and it came back how the display should have looked, only I can't see the right half.
Thinking it was the video card, I called tech support and they sent me a new one It does the same thing. I have the newest monitor and video card drivers. I don't know why it's doing this. Any ideas? If both monitors are plugged in before booting up sometimes the monitor plugged in to the white port turns on but never gets to the login screen, other times it logs in fine, but the monitor in the blue port still has no display.
It's LED is orange meaning it has power, but it's not green like it should be. Plugging in the second monitor while in Windows does not solve the problem either. XP recognizes a connected device, knows it's a monitor, but using the Control Panel or CCC does not display anything on the second monitor.
I didn't have Catalyst Control Panel installed before. The blue port didin't work then, and it doesn't work now that I have it either. Like I said, you can tell the desktop is being extended, and the device manager shows two monitors connected. I don't know what it is It's not the video card unless all x do this Do you tell Windows to use the second screen as an extended desktop in the Display Properties? Yes I did. I also tried using the CCC to do the same thing. The same thing happens: The desktop is extended, but the monitor connected to the blue port does not display anything.Click here.
Use this document to configure the audio settings, determine the correct connection port, and begin using your external audio device on your computer. Connecting headphones This section describes the ports and connector plugs needed to use your headphones with your computer.
Your headphones have a three-segmented or four-segmented connector plug. Both produce sound when plugged into a headphone connector. The three-segmented plug is for headphones only. The four-segmented plug supports a headphone and an attached microphone. Insert the headphone plug into the port on the computer marked with a diagram of headphones.
After connecting headphones, configure the sound settings using the steps in Setting the default sound device. Connecting speakers The following sections describe the ports, plugs, and cables needed to use speakers, and a variety of speaker configurations to use with your desktop computer. Computer ports for the speakers or headphones This section gives examples of the various port types found on the back and front of the computer.
Line-in on some computers, the microphone can also be configured as the rear speaker out through the Sound Manager software. Side speaker out. Speaker configuration Choose your speaker configuration to view information about positioning your speakers:. Do not use older, non-powered speakers with your computer as they are not amplified and do not produce enough volume.
Configuring two desktop computer speakers Use the following steps to connect a pair of front desktop speakers to the computer:.How to Use HDMI \u0026 Audio Input in an Acer Monitor : Audio \u0026 Sound
Position one speaker on each side of the computer monitor. Connect the audio cable to the green Speaker Out port on the back of the computer. After connecting the audio cable, configure the sound settings using the steps in Setting the default sound device. Configuring stereo speakers built into the monitor Depending on the monitor, you might need to connect an audio cable, or both an audio cable and an HDMI cable.
Check the monitor user guide for more information. Connect the audio cable to the green audio port on the monitor, and connect the other end to the green audio-out port on the computer. For more specific installation and setup instructions, see your monitor setup guide.Here at Walmart. Your email address will never be sold or distributed to a third party for any reason.
Due to high volume, we can't respond to individual comments. Your feedback helps us make Walmart shopping better for millions of customers. Recent searches Clear All. Enter Location. Update location. Learn more. Refine by Top Brands. Departments Electronics Computers. Deliver To Home. Free pickup. Retailer Walmart. Cord Length 1 m 1' 10' ' 12' 15' Features Waterproof. Recommended Use Office School. Search Product Result. Product Image.
Audio Combo Port
Product Variants Selector Show More. Average rating: 3. Choose Options. Reduced Price. Add to cart. Average rating: 5 out of 5 stars, based on 2 reviews 2 ratings. Average rating: 5 out of 5 stars, based on 5 reviews 5 ratings. Average rating: 0 out of 5 stars, based on 0 reviews. Product Variants Selector. Product Title USB 3. Average rating: 5 out of 5 stars, based on 1 reviews 1 ratings.
Average rating: 1 out of 5 stars, based on 1 reviews 1 ratings. Average rating: 3 out of 5 stars, based on 2 reviews 2 ratings. Average rating: 2. Average rating: 4.I know this because of the Microphone icon appears in the tray when I plug it in and disappears when I unplug it. I have NO microphone plugged into my PC at all. I use the audio input to listen to my stereo receiver mainly LPs while computing. This setup worked flawlessly until recent Windows 10 updates introduced the microphone always on with the icon feature.
The blue 3. No microphone is plugged into either rear or front pink microphone input port. With this new "microphone" situation, any website browsed to can activate the microphone which I don't have as stated. One site of note is Netflix. If I go to one of these sites that wants to activate my microphone that I don't have :. From that point on I cannot get my Audio In music to play through my soundbar.
The Audio Line In is working because the audio meter in the Sound settings is still pulsing. No reboots nor enabling and disabling Sound settings can get the "Line In" sound playing back to the soundbar. System sounds and web site videos can still be heard. Essentially a microphone that I don't have event breaks the Line In audio from being "heard" from that point on. The only way I have figured to get the ability to hear my receiver on my PC out to my soundbar is to run System Restore to my last restore point.
Is there a workaround? The blue Realtek Audio Line In should not be detected as a microphone and utilized as such. This needs to be fixed ASAP! Did this solve your problem? Yes No. Sorry this didn't help. I found a workaround, but the big concern for me and I'm sure others is the recent addition of the microphone feature in Windows It's a huge invasion of privacy concern. Prior to this addition, I never had a website just simply activate my non-existent microphone on my Desktop PC.
I can disable the microphone option in Windows 10, but doing that also disables my Realtek Audio Line In jack. That's just plain crazy! My workaround was to locate a spare headphone with microphone jack and plug that microphone jack into my Realtek "microphone" input and mute it via the switch on the headphone cord.
Windows 10 recognizes the headphone connection and I set it to "Default Communications Device" in the Sound settings.
Meanwhile the audio "Line In" is also set as "Default Device". Now websites try to access my muted unused microphone rather than making Windows 10 break my audio "line in". Site Feedback. Tell us about your experience with our site. If I go to one of these sites that wants to activate my microphone that I don't have : 1 my display blacks out for a second, then comes back on with a notification that the site has accessed my microphone.Audio connectors and video connectors are electrical or optical connectors for carrying audio and video signals.
Audio interfaces and video interfaces define physical parameters and interpretation of signals. For digital audio and digital videothis can be thought of as defining the physical layerdata link layerand most or all of the application layer.
For analog audio and analog video these functions are all represented in a single signal specification like NTSC or the direct speaker -driving signal of analog audio. Physical characteristics of the electrical or optical equipment includes the types and numbers of wires required, voltages, frequencies, optical intensity, and the physical design of the connectors.
Any data link layer details define how application data is encapsulated for example for synchronization or error-correction. In some cases, the application layer is left open; for example, HDMI contains an Ethernet channel for general data transmission. Some types of connectors are used by multiple hardware interfaces; for example, RCA connectors are defined both by the composite video and component video interfaces, but DVI is the only interface that uses the DVI connector.
This means that in some cases not all components with physically compatible connectors will actually work together.
Some of these connectors, and other types of connectors, are also used at radio frequency RF to connect a radio or television receiver to an antenna or to a cable system; RF connector applications are not further described here.
For efficiency and simplicity, the same codec or signal convention is used by the storage medium. Some digital connection standards were designed from the beginning to primarily carry audio and video signals simultaneously:. Selection of one over the other rests mainly on the availability of appropriate connectors on the chosen equipment and the preference and convenience of the user. Connections longer than 6 meters or so, or those requiring tight bends, should use coaxial cable, since the high light signal attenuation of TOSLINK cables limits its effective range.
There are three HDMI connector types. IEEE branded "FireWire" is a digital data transfer protocol commonly used for digital cameras common on MiniDV tape camcordersbut also used for computer data and audio data transfers. Unlike Point-to-Point connections listed above, IEEE is able to host several signals on the same wire, with the data delivered and shown on the destination set.
It is also fully bi-directional, with its full bandwidth used in one direction or the other, or split directions up to its maximum. DisplayPort is a digital display interface standard approved Maycurrent version 1. DisplayPort is a competitor to the HDMI connector, the de facto digital connection for high-definition consumer electronics devices. Audio connectors are used for audio frequencies.